VVDI2 VAG Full with 4th 5th IMMO ID48 96bit ID48 OBDII and Free Porsche Function
- VVDI 2 includes all the VVDI functions, the function of Tango, remote control generation and chip identification is improved, and also the coil’s stability has been enhanced.
- This version contain Basic Module, VW module and 5th immo authorization and Porsche Function
This item includes Full VAG Authorization:
1. √ VV-01 VAG 4th immobilizer
2. √ VV-02 VAG 5th immobilizer
3. √ VV-03 VAG Copy 48 transponder by OBDII
4. √ VV-04 ID48 96Bit Copy
5. √ VV-05 VAG MQB Immobilizer
6. √ VP-01 Porsche immo data tool
7. √ VK-01 Transponder Programmer
8. √ VJ-01 Passthru J2534
Top 6 Reasons to Get VVDI2 VAG:
1.VVDI2 VAG Newest Software:V6.7.5
2.VVDI2 Language: English/Polish/Spanish/Russian/German(
Require dealer license)
3.Update method:Update online frequently for both software and firmware
4.Newly Add Porsche Software Function for Free.
5.Support Diagnostic function like:Identification,Read/Clear DTC'S,Coding,Actuator test,Security access,ecu flasher,UDS adaption.etc
6.Special Function:Change KM,EEPROM Dump Tool,Engine control Unit,K-Line Instrument/Immobox,adapt Unit,Component Protection.
V6.7.5 VVDI2 Update Info: 2020-05-28
Require firmware V6.7.5
1. Improvement for autodetect VAG immobilizer system
2. Improvement for update FRF, SGO file
1. Improvement for CAS3 key learning
Transponder Programmer V6.7.5
VVDI2 Key Programmer Comparsion:
VVDI2 VAG Reviews:
1. Improvement for make proximity remote
2. Immobilizer data tool:Asia->Hyundai->Santa Fe->2008-MPC5XX bugfix
3. Improvement for clone ID70/ID83
4. Special chip: Add new ID47 for GreatWall ORA
I successfully added a key bcm2 on a 2013 audi a5.
2007 Audi A4 B7 RB8 crypto - mileage correction ok
Audi BCM2 add spare key by obd worked fine, and I did one on a 2013 A5 and it worked flawlessly.
A6/Q7 EZS Kessy: Added a dealer key (remote sourced from the dealer) without issues. Seemed to read everything properly but I had a working key to begin with.
Audi A6: Testet with A6 read kessy working, learned new key
Skoda Octavia 2006: got CS & PIN , programmed key fine, but not remote programming.
VW passat. B5: Pulled PIN, programmed key, corrected miles.
VW Passat B6 2009: Pulled PIN but couldn't get 6 bytes CS, needed comfort dump.
VW Transporter T5 2006 : Pulled PIN Programmed key, no remote programming.
Audi A4 2006 : mileage correction success .
Audi A6 2003: Mileage correction fail. car not start. remove battery terminal. car start.
Had no problem with precoding and programmin 2 keys for 2014 Jetta today. Worked well.
Audi A6 C6 2007 add valet key via OBD without problem.
VVDI2 Special Function:
Including all VVDI functions, improved and more stable
More vehicle coverage, multi Immo functions
New added plug-in function and reserved connectors to include all VVDI functions
Add more vehicle models:
VVDI supports diagnostic function only for VAG groups, but VVDI2 has achieved multi brand vehicle diagnosis and supports part of vehicle immo programming function and software online upgrade.
VVDI2 can replace lots of customized devices. Users do not need to purchase specific OBD tool for specific vehicle makes which will save you a lot.
Plug-in function, reserved connectors.
VVDI 2 can act as a multifunction programmer to connect plug-ins, and read & write IC and CPU data.
Can read and write Benz IR key, can program key for old and new Mercedes–Benz, can connect BMW plug to realize OBD function, and meanwhile reserve some connectors for further uses.
The core function is to detect the remote control frequency
Automatically identify chip type
Support multi-function on VW vehicles
Remote control programmer
J2534 compatible adapter
1. Detect key frequency, automatically identify chip type
The test result can show on the main unit display, no need to connect computer
2. Support VAG vehicle diagnostic function
Read & write Immo4/Immo5 system
Program BCM remote
K-Line instrument immobilizer box
Program control unit
Unlock Immo1/Immo2 firmware protection
Support data manipulation tools
3. Key programmer
Program key chip
Generate specialized chips
Immobilizer data processing tool
Other key tools
Generate remote control
4. Passthru J2534 Introduction
With built-in switch matrix, it supports third-party diagnostic software including: ODIS, Toyota TIS techstream etc. To perform VVDI2 diagnostic function, third-party diagnostic software should be compatible with J2534 function.
VVDI 2 superiority:
VVDI technician has devoted themselves to VVDI free update online and update service in the pass five years. This is what VVDI has been widely respected and ranked as a power tool.
There is no doubt that the more power and high-end configuration VVD2 will inherit the fine traditions.
Apart from free update online service and system optimization, more powerful functions and vehicle models (Like Porsche) will soon be available via update. And other more functions, you name it…
VVDI2 goes beyond than VVDI in function, connectors and vehicle coverage etc. After all, VVDI belongs to locksmith tool while VVDI2 becomes a comprehensive locksmith device.
VVDI2 VAG Software Language:
1. VVDI 2 Main Interface
2. 5th BDM Programmer
3. OBD2 cable
4. USB Cable
Email: email@example.comIf you have any questions, please do not hesitate to contact us.Shipping Method and Delivery Time:
US, UK ,RU Warehouse: 3-7 working days. We have stocked up hot sale items in US, UK ,RU Warehouse, Fast Delivery No Tax. But if overseas warehouse is sold out,we will send from Hongkong.
DHL: 3-5 working days. Usually we declare lower value on DHL invoice. If your address is remote area for DHL, customer will need to pay remote cost about 35USD or ship by EMS or YANWEN. Please leave message if you have any special requirement.
Yanwen Express: 5-14 working days. No Tax or remote cost for European Countries.
VVDI2 VAG FAQS,
VVDI2 MQB Function:
VVDI2 add Audi A6L / Q7/ EZS-Kessy (JB18) Spare Key General Steps
VVDI2 VAG FAQs:
1.Q:VVDI2 doesn’t work with EDC 16U1… Tried on Seat Toledo MY05 using VW Touran ECU. Finally I disabled immo but I want to adapt it to car
A:I am sorry that not work because is tool old … working after 2007 (u34).You can adapt that type of ECU via SCK.
2.Q:s it possible to swap with Xhorse VVDI2 VAG if I know CS, PIN and IMMO I try now on Skoda to change vin with success.
Use any u34 ECu from 2007 up and you will see.
A:I am sorry that it is not supported at present.Thanks.
3.Q:VVDI2 VAG software change langauge,but it got failed,error like following,how can i solve?
A:Please right click and select "Run this program as an administrator",then change langauge English.Because Polish language is not completed yet,it get the error like pic shows.VVDI2 VAG Polish language will be added fully soon.Thanks.
4.How to change Xhorse VVDI2 Screen Menu Language?
Please press T button,and it will have option to switch language.
VVDI2 add Audi A6L / Q7/ EZS-Kessy (JB18) Spare Key General Steps
VVDI2 VAG newly add the function of copy 48,but require VAG 4th immo authorization.
VVDI 2 -> Key Learn -> 4th Immobiliser System Audi -> A6L / Q7/ EZS-Kessy (JB18)
Read note: Most cars before 2009 use 9S12DT128 chip and cars after 2009 use 9S12DT(G)256
Choose appropriate chip above -> Read J518 EEPROM with Working Key -> Write down CS and Pin on a piece of paper -> Save EEPROM
Type CS and Pin into VVDI 2 -> Type “2” for Number of keys to learn -> Insert 8E chip into VVDI 2 ->Select Make Dealer Key -> Select Key Learning
Insert dealer key into car and switch on for 2 seconds. Then put second key into ignition within 5 seconds. Then press okay after keys are learned.
1.Run VVDI2 Quick Start icon,and click VW car brand.Or run directly the VVDI2 Vag software icon.
2.Click Key learn>>4th immobilizer system – copy 48 transponder
3.Copy 48 procedure require PIN and component security bytes from cars.
4.Select Get component security from engine control unit via obdii.
5.Connect the emulator to VVDI2 commander and switch ON ignition with the emulator, switch OFF/ON for 3 times
(attention: it requires OBD when lost all key).
6.Decode the collected data via internet, and save the calculate 48 data. You can copy/prepare key with calculate 48 data(attention: every success calculation will cost 100 remote points).
7.Learn the new key with calculate 48 data. If the key was made by copy, it can start engine without learn.