If you you want to get the functions for BMW FEM/BDC,and you have Xhorse Condor XC-MINI Key Cutting Machine, you can buy this service.
VVDI2 BMW FEM/BDC Function Authorization Service For Condor Cutter Only
If you do not have condor key cutting machine, please check SV86-S1 authorization service.
If you want to get the functions for BMW FEM/BDC, and you have Xhorse Condor XC-MINI Key Cutting Machine, you can buy this service.
1. Support display FEM/BDC system frequency
2. Support exchange FEM/BDC function, you can exchange second hand FEM/BDC module
3. FEM/BDC system now supports 16 key positions
No need ral shipping, after you pay this service, we will open the authorization for you. Please leave the serial number of VVDI2 and Condor MINI after you buy this authorization.
VVDI2 BMW FEM/BDC Function:
VVDI2 - BMW FEM/BDC system (function released and available, just no user manual)
Users can refer to following information (3 steps for make keys: get key info->programming FEM/BDC system->make keys)
1.support make new key with ignition switch (support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM (cluster require reset manually)
3.support erase key (after erase the key position become blank position)
4.support backup coding
5.support restore coding
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show: customer should use "BMW E-sys software" program FEM/BDC system. Then programming FEM/BDC system with VVDI2-BMW
4.when operation on 'programming FEM/BDC system interface, please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.(FEM 95128 chip, BDC 95256 chip) usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system, must restore the original eeprom, restore coding. If cannot restore coding or after restore coding assemble FEM/BDC module back to car, but with problem(such as the remote control cannot start the car
or the car with window problem) please use "BMW E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keeps ringing, please contact technical support for help. Usually operation on FEM/BDC should be ok, just need to programming.
Email: firstname.lastname@example.orgIf you have any questions, please do not hesitate to contact us.
Shipping Method and Delivery Time:
EU, US, UK ,RU Warehouse: 3-7 working days. We have stocked up hot sale items in US, UK ,RU, EU Warehouse, Fast Delivery No Tax. But if overseas warehouse is sold out, we will send from Hongkong by DHL.
EU warehouse only for EU customers. UK warehouse for UK address only! US the same, and not includes overseas territories.
DHL: 3-7 working days. And EU address by DHL invoice value can't be less than 150USD. If your address is remote area for DHL, need to pay remote cost about 35USD or no extra fee ship by YANWEN.
Yanwen Express: 5-17 working days. No customs Tax or remote cost for EU Countries.
When Program BMW CAS3 keys, we often suggest to take photos and record the CAS version code. In case of programming interruption, the OBD data can be repaired according to the recorded version. As well as FEM\BDC, suggest to record the key information read after connecting the vehicle.
As you can see VVDI2 BMW FEM/BDC Key Learn pic, the key info display “VIN, SWFL, TLD, CAFD, IMMO Type”
If there is an error in the operation, you can know which part has a problem.
If the value of SWFL becomes 0000 000000 FFFFFF or 255 255 255, there is a problem with the programming file, and you need to use BMW programming tool to program the FEM/BDC. You’d better select the previously recorded version of SWFL to write into a new file for programming. (Or choose a version with a small span between the previous version).
If the data of CAFD becomes 0000 000000 FFFFFF or 255 255 255, it means that there is a problem with the coding file. You only need to restore the coding or use coding tool.
After understanding the content of SWFL and CAFD, we can treat them differently when we encounter problems, avoiding programming and coding all the time no matter what problems.