Xhorse Iscancar V-A-G MM-007 Diagnostic and Maintenance Tool
Latest Version:V2.3.2 (Please use Xhorse Update Kit software to Update)
Free Download VAG MM-007 Simulator V1.6.6 Software
Xhorse iscanner 2.3.2 Update time: 2019/07/11
NEC35xx change mileage
Iscancar VAG MM-007 Basic function:
Support controller diagnostic, such as basic setting, channel adaption, read DTC, clear DTC, system login, etc.
Guide function:
There are many commonly used functions. We have simplified the process so you can follow it more easily.
Special function:
OBD read PINs, adaption after replacing controller, gateway register, etc.
Write data record:
When replacing the new controller, you must write a data record online or the controller will not work correctly. Now you can use this diagnostic tool to write data records offline. And you can active some functions like MKE etc.
Example for write data record:
PQ35 gateway 7N0907530AN: active MKE. after writing the data record, you can set MKE on the dashboard.
MQB gateway 5Q0907530AJ: active MKE. after writing the data record, you can set MKE on the dashboard.
PQ35 replace kessy 5K0959434B: before writing data, there's a DTC “no basic setting”, the car can't find keys. After writing data the DTC disappears, the car can find keys.
MQB replace kessy 5Q0959435A: before writing data, there's a DTC 10478040(invalid data record), the car can’t find keys. After writing data the DTC disappears, the car can find keys.
MQB front camera 5Q0980653G: before writing data, there's a DTC 0649 (invalid data record), after writing data the DTC disappears.
MQB new ACC 5Q0907561A: before writing data, there's a DTC” invalid data record”, after writing data the DTC disappears.
PQ Xenon 5M0907273F: before writing data, there's a DTC 10478040 (invalid data record), after writing data the DTC disappears.
PQ tire pressure monitor 3AA907273D: before writing data, there's a DTC 12652550 (invalid data record), the controller doesn't work, after writing data the DTC disappear, you can set tire pressure on the dashboard.
MQB new DCC 5Q0907376: before the writing data, there's a DTC 813056 (invalid data record), after writing data the DTC disappears.
MQB parking assistance 5Q0919298K: before writing data, there's a DTC 10478040 (invalid data record), after writing data the DTC disappears.
Essential Function of Refitment and Maintenance:
Many functions are very useful for refitment and maintenance, such as controller replacement, throttle adaptation, and EPB replace brake pads. In addition, further functions will be added continuously.
Built-in database:
There's a built-in database in the diagnostic tool. Users can write data records without an online account. It has already supported many controllers, and more data will be continuously added.
Xhorse technical support team is professional and efficient, online technical support for free.
Provide lifelong after-sale perfect service guarantee customer trouble-free operation of the machine.
Consider customer feedback suggestions and requirements carefully.
Online Upgrade:
The VAG MM-007 can be upgraded through the internet.
Xhorse Iscancar VAG MM-007 Update Information
V2.1.8 (2017-07-18)
---------------------------------------------
1:Add EA111 UDS engine check oil level.
2:Add EA111 UDS genine clear value adapt throttle.
3:Add UDS EPB set "VIN check" option.
4:Add GTI7.5 3Q0907338 parameter file.
5:Add Audi start-stop setting.
6:Add Audi A4(2017) sports needle.
7:Fix 4B unit connection bug.
8:Change some description of parameter files.
V2.1.8 (2017-07-18)
---------------------------------------------
1:Add EA111 UDS engine check oil level.
2:Add EA111 UDS genine clear value adapt throttle.
3:Add UDS EPB set "VIN check" option.
4:Add GTI7.5 3Q0907338 parameter file.
5:Add Audi start-stop setting.
6:Add Audi A4(2017) sports needle.
7:Fix 4B unit connection bug.
8:Change some description of parameter files.
V2.1.6 (2017-05-15)
---------------------------------------------
1:Add magotan/CC replace new comfort module.
2:Add MIB RCTA sensors setting.
3:Add some controller configuration parameter files.
4:Add SD card format &create folders.
5:Add recover coding after refresh parameter files.
6:Fix other bug.
V2.1.4 (2017-04-27)
---------------------------------------------
1:parameter refresh write multi data blocks one time.
2:Fix can't auto detect instrument type when read PIN.
3:Add parameter files as below:
3.1: New lavida steering assistance 180909144.
3.2: skoda PQ superb kessy.
3.3: lamando kessy three antennas.
3.4: VW411 kessy 5K0959434H.
3.5: VW411 BCM light data. 5K0937087AG.
3.6: VW411 DCC 3C0907376x.
3.7: VW411 gateway(active/deactive MKE).
3.8: VW411 DSP config data(fender/dynaudio).
3.9: VW411CS headlight AFS.5M0907357G.
3.10:VW411CS front camera,3Q0980654.
V2.1.3 (2017-04-22)
---------------------------------------------
1:Add 2017 sharan light data.
2:Add xenon static AFS.
3:Fix reprogram BCM firmware bug.
4:Fix reprogram UDS module bug.
5:Add parameter files as below:
5.1: lamando ACC 5Q0907572A/B/D.
5.2: lamando PDC 5Q0919294.
5.3: lamando PLA 5Q0919298A/D.
5.4: lamando Kessy 5Q0959435A.
5.5: lamando Gateway 5Q0907530N/Q.
5.6: lamando rear left door 5Q4959393B/595B.
5.7: lamando rear right door 5Q4959393B/595B.
5.8: VW37x headlight AFS 5Q0907357/A/D.
5.9: VW37x SWA 5Q0907686.
5.10: VW37x front camera 5Q0980653C/E/F.
5.11: VW37x steering assistance 5Q0909144P.
V2.1.2 (2017-04-13)
--------------------------------------------
1:Add PQ MIB clear DTC after updating firmware.
2:Add PQ MIB golden menu.
3:Add sharan sliding door basic setting.
4:Add Lane keep for 30 seconds.
5:Add 0AM DSG Software Nr Index Version GKBS.
6:Add some parameter files.
7:Fix some bugs.
V2.1.1 (2017-04-01)
--------------------------------------------
1:Fix SD card refresh xml parameter files bug.
2:Add PQ MIB adapt dashboard test.
3:Add NEC+24C64 EEPROM function.
3.1:Park braking type.
3.2:Number of fuel tanks.
3.3:MFW type.
3.4:Temperature unit.
3.5:Distance unit.
3.6:Speed unit.
3.7:Time format.
3.8:Comsumption format.
3.9:Sun roof indicator.
3.10:Side indicator.
3.11:DPF indicator.
3.12:Parking indicator.
3.13:Engine indicator.
3.14:Oil temperature menu.
3.15:Refuel volume menu.
3.16:Support menu.
3.17:Logos.
3.18:Alternative logos.
V2.1.0 (2017-03-27)
--------------------------------------------
1:Add gateway list state.
2:Add touranL auto air conditioner wind speed display.
3:Add VAG addtional information code description library.
4:Add PQ MIB amplifier setting.
5:Add 2017 3D color dashboard golden menu setting.
6:Add lamando1.4T driver door/passenger door config parameter filesˇŁ
7:Add NMS soundsystem config parameter files.
V2.0.9 (2017-03-17)
--------------------------------------------
1:Add TiguanL parameter files.
2:Fix Magotan/CC convience adaption.
3:Fix controller adaption menu.
4:ODX firmware support up to 60M.
5:Fix color dashboard reprogramming error.
5:Fix others.
V2.0.8 (2017-03-02)
--------------------------------------------
1:Add temporary parking lock door.
2:Add air conditoner self check mode.
V2.0.7 (2017-02-24)
--------------------------------------------
1:Add replace PQ35 dashboard(UDS).
2:Add LED license plate alarm.
3:Fix other error.
V2.0.6 (2017-02-22)
--------------------------------------------
1:Add NEC+24C64 EEPROM function.
1.1:enable dashboard needle self check.
1.2:enable backlight of scales.
1.3:enable backlight of needles.
1.4:enable backlight of needlse for 30 seconds after locking.
1.5:dashboard production mode.
1.6:driving mode.
1.7:handbrake light position.
1.8:welcome menu.
1.9:close engine oil sensor prompt.
1.10:digital speed.
1.11:oil tank feature.
1.12:solve needle shaking after reprogramming firmware.
1.13:oil tank openning prompt.
1.14:DRL indicator.
1.15:white screen LCD type.
1.16:enable TwinDrive.
1.17:trailer indicator.
1.18:dipped headlight indicator.
1.19:front fog light indicator.
1.20:shift gear position P/N prompt.
1.21:speed scales 240/260/280/300km/h.
2:Add uds dashboard service interval setting.
3:Add change new dashboard milleage.
4:Add close dashboard production mode.
5:Add support chinese of SD card files.
6:Add BCM read/write remote keys ID.
7:Fix xml parameter files parse error.
8:Add static DTCs prompt.
V2.0.5 (2017-01-11)
--------------------------------------------
1:Add reprogramming uds unit,support frf/odx format.
2:Add some parameter files.
3:Add DSG gearbox go into neutral gear.
4:Fix other errors.
V2.0.4 (2016-12-14)
--------------------------------------------
1:Add description of many parameter files.
2:Add some parameter files.
3:Fix kwp2000 adaption error.
4:Fix kwp1281 communication error.
5:Fix uds protocal communication error.
6:Fix other errors.
V2.0.3 (2016-12-01)
--------------------------------------------
1:Add sgo format firmware reprogramming.
2:Touareg set four brake light.
3:PQ MIB dynaudio mode.
4:PQ MIB engineering mode.
5:PQ MIB connect two phones.
6:TRW460 ABS coding.
V2.0.2 (2016-11-21)
--------------------------------------------
1:Add reprogramming steering assistance curve.
2:Add some config parameter files.
3:Fix uds dashboard can't change milleage.
V2.0.1 (2016-06-23)
* Init version
--------------------------------------------
this is test!