How to use Xhorse Toyota 8A Non-smart Key Adapter?

---

Matched product:

Xhorse Toyota 8A Adapter FAQs:
Q:1.when use toyota 8a adapter,got the error "unlock immobox failed, please reconnect all device and retry!-Err:A6 50"

A: It does not support your type.

And if error like the following pic, not support too.

---

Please update your VVDI2 to newest version.

Xhorse Toyota 8A Non-smart Key Adapter with VVDI2 Connection Diagram

Note:

During the process don't insert the key,please keep ignition off.

1.Disconnect the positive pole of the car battery to protect the connectior and avoid short circuits.

 

2.Please connect to fuse box as the image.

3.Please connect the ELV like the wire as shown

4.Please connect to car OBD,all key lost cables and car battery.

5.Please generate start chip referring to software interface.

6.Please disconnect all cables, recover all connection wires as car original status (If the connection wires not recovery to original status and start the car directly,the fuse boxe and device will be burnt)

7.Test generated transponder.