Xhorse Iscancar V-A-G MM-007:
1.Support controller diagnostic: basic setting, channel adaption, read DTC, clear DTC,system login etc
2.OBD read PINs, adaption after replacing controller, gateway register etc
VAG-MM007 Diagnostic and Maintenance Tool Support MQB KM Function
VVDI for the vehicles VW Audi-Powerful function tool for VAG vehicles
Latest Version: V3.5.4
Support Most V-A-G Vehicles
SVDI VAG Command 18+BMW Commander V9.6+Immoplus+Tag Key Tool
1. Has the same function as the original AVDI.
2. Support diagnose, ECU programming, immobilizer for VW group vehicles.
3. Support Tag Key Tool function.
4. Supported protocols: KWP2000(TP2.0, TP1.6), UDS CAN, KWP1281
Super V-a-g 3.0 ISCANCAR VAG KM IMMO OBD2 Code Scanner,support almost all VW Audi with protocol KWP1281 (K-line), KWP2000 (K-line) and KWP6000 (CAN).
ISCANCAR can do almost all control modules of VW Audi vehicles, and maintain dashboard mileage, read immobilizer code and match key.
1.Super V-A-G K+CAN V4.6 do odometer correction ,read Security Access Code, key programmer, airbag reset tool, TV Activation and diagnostic.
2.Support VW Passat, VW, VW Bora, VW Polo, VW Golf, Audi A6, Audi A8, Audi A4, Skoda Superb, Skoda Octavia, Skoda Fabia vehicles before 2007.
VAG KM+IMMO Tool works for VW/Audi/Skoda/Seat car after 2006.06. It can be used for odometer correction, EEprom read/write, pin code read by OBD2 port. VAG KM+IMMO Tool support online update,easy to use.
1.Micronas OBD Tool (CDC32XX) programmer for Volkswagen and Skoda cars from year 2006.06 by OBDII diagnostic.
2.VAG Micronas CDC32xx programmer supports odometer correction, PIN code read, EEPROM read/write, it is a multi-function and reasonable obd2 product.
Micronas OBD TOOL this cable can only do VW car with CDC32xx dashboard, after you purchasing MM7 Update Module, your cable will be able to do VW dashboard which is MM7 module.
No need shipping, gain MM7 module in few mins.