Xhorse VVDI2 Commander Key Programmer Technical Service

Matched product:

V7.3.6 Xhorse VVDI2 Full Version Key Programmer 13 Software Activated Free with CAS4 Platform + FEM/BDC Platform +GT100

EU/UK Ship V7.3.6 Xhorse VVDI2 Full Version Key Programmer 13 Software Activated Free with CAS4 Platform + FEM/BDC Platform +GT100

Latest price:US$1,599.00
US$1,399.0013% off
  • Item No. HKSV86
  • Free Shipping
V7.3.6 VVDI2 full with 13 software activated, free with English GL database, cs mac, pin function, update online free lifetime. Support for VW, Audi, BMW and Porsche, PSA.

vvdi2-introductions.pdf  (834K)

vvdi2-update-online-manual.pdf  (435K)
vvdi2-install-software-and-driver.pdf  (636K)
vvdi2-transponder-programmer-user-manual.pdf  (2.2M)
vvdi2-vag-user-manual.pdf  (2.5M)
vvdi2-bmw-user-manual.pdf  (1.6M)

How to use Xhorse VVDI2 Commander Key Programmer
VVDI2 Commander Key Programmer FAQs
Q: How to solve VVDI2 BMW Software Database Update error?software and firmware already the latest version?

VVDI2 database file lower version may cause some function failed. We strongly suggest you update to latest database file!
Here is download link:https://mega.nz/#!VH4A2I7a!Sl_ajPsiSJaN-ArUUkiTmCsQ54UVY4YP2LzlXT8hSh8

1.Q:Customer gave us feedback that can not understand the page,it is not English,not Russian.What is it?

A:Please send us your VVDI2 SN and country,we will change database to GL,English version. And from now on,new VVDI2 all English database,please do not worry.

2.VVDI 2 shows "remaining synchronization time: 17 days",what is it?
A:It means after you activate it to use,it already use for 13 days.And when it comes to 0 days,you can connect with internet,it will automatically change to 30 days again.
It connects to the server and synchronizes once every 31 days. This process is done automatically by itself for 1 day, internet connection is required for this process.
vvdi 2 key programmer

3.When i do MED17 function,it shows need authorization for condor,what can i do?

A:Please send us your VVDI2 SN to activate free for you.

4.What is Xhorse VVDI2 Programmer Points System?it asks to bind vvdi2 and vvdi mb bga tool.
Exchange VVDI MB Tool calculate password tokens.For the first time exchange tokens,servcer will bind MB sn with VVDI2.One MB Tool device only bind one VVDI2 device.
VVDI2 points
A:If you use Xhorse Remote/key and add to car, every key give you points. Then you can exchange points.And points are OK to change to tokens.
Points system is only OK in China at present.As well as vvdi2 remote keys.When vvdi key tool in stock,and vvdi2 newer version release,this will be OK.
How to use VVDI2 BMW FEM function?

VVDI2 - BMW FEM/BDC system(function released and available, just no user manual)

Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show:customer should use "BMW E-sys software" program FEM/BDC system.then programming FEM/BDC system with VVDI2-BMW
4.when operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.(FEM 95128 chip, BDC 95256 chip) usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car 
or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.
VVDI2 Programmer Feedback
I successfully added a key bcm2 on a 2013 audi a5.
2007 Audi A4 B7 RB8 crypto - mileage correction ok
Audi BCM2 add spare key by obd worked fine, and I did one on a 2013 A5 and it worked flawlessly.
A6/Q7 EZS Kessy: Added a dealer key (remote sourced from the dealer) without issues. Seemed to read everything properly but I had a working key to begin with.

Audi A6: Testet with A6 read kessy working, learned new key
Skoda Octavia 2006: got CS & PIN , programmed key fine, but not remote programming.
VW passat. B5: Pulled PIN, programmed key, corrected miles.
VW Passat B6 2009: Pulled PIN but couldn't get 6 bytes CS, needed comfort dump.
VW Transporter T5 2006 : Pulled PIN Programmed key, no remote programming.
Audi A4 2006 : mileage correction success .
Audi A6 2003: Mileage correction fail. car not start. remove battery terminal. car start.
Had no problem with precoding and programmin 2 keys for 2014 Jetta today. Worked well.
Cars that I have successfully done with VVDI2
2005 BMW E87 CAS3
2006 BMW E90 CAS3
2003 BMW E60 CAS2
2010 Audi A5 with Keyless Entry
2011 Audi A3
2009 VW Golf mk6
I tested my vvdi2 on 2008 bmw m6 today. It worked flawlessly and was a bit quicker than multitool.
I did a perfect job on 2010 bmw X5 with ISTAP today. I downgraded CAS ( I backed up eeprom with xprog first) and then retrieved key info OK. Adding key was a brieze after that. Cleard all errors, sinchronized ELV. DONE
Hi i yesterday have bmw f10 2012 year ,read cas4+, change, write back all ok work .happy 100%

VW Golf 2019 Johnson Controls Add Key by VVDI2 Success

How to check VVDI2 Point System?

Enter into VVDI2 Transponder Programmer software,you can see Ponits System.

Or you can go to xhorse update kit software,click bonus points to check.But you need bind your vvdi2 with xhorse account firstly,thanks.