How Xhorse Watch Smart Key configuration & programming to your vehicle
This is a guide on how to use Xhorse Keylessgo Watch configuration & programming to your vehicle step-by-step.
SW-007 Keyless go Watch is another Xhorse Universal Smart remote. It can be programmed by your Key Tool Plus, Key Tool Max or even Mini Key Tool.
The process is similar to another Xhorse universal key:
1)Pick the FCC ID, remote, or your make and model
2)Write the configuration into the watch
3)Program it to the vehicle by any key programmers you want
Here is a complete demonstration for reference:
- Model: Chrysler 300 2021
- Tools:
- VVDI Key Tool Plus
- FCA 12+8 SGW Bypass Cable
Part 1. Generate the remote
Go to
-
Remote Program>>North America>>Chrysler>>[All Remotes]>>Chrysler 200 KeylessGo ID4A
Put your smartwatch into the key coil and press “Generate”.
Here if you experience the error “Write Failed”, put your watch slightly deeper so that it could be detected.
Try again and you should put a slight bit of downward pressure on the watch and it would be done.
Part 2. Program the immobilizer
Plug Key Tool Plus to the vehicle via OBDII, and don’t forget the FCA 12+8 Converter since there is a security gateway in this model.
Go to
-
Immo Programming>>North America>>Chrysler>>Select by model>>ASIA>>200>>2019-2021>>Smart key system>>Start Programming
Check “Key Count” and “Read PIN code”.
Then press “Add smart keys”
If it prompts “Fail”, try if the watch could work first.
Start the vehicle, no problem.
Done!
That’s how to use Xhorse SW-007 Smart Watch.
For more info, contact us.