Mid-Year Sale EU Ship No Tax Xhorse Multi Prog Global Version with GODIAG ECU GPT Boot AD Connector and G-V ECU Cable

Product Description

Xhorse Multi Prog Global version with GODIAG ECU GPT Boot AD Connector and G-V ECU Cable
 

Multi Prog Global Version, No database update issue.

Bundle Package for sale, including:

• Multi Prog
• ECU GPT
• G-V ECU Cable

 

What is the new feature of Multi-Prog?

• Multi-Prog is with MQB48 license/ BMW Bench Read ISN, bind with Xhorse VVDI2/ key tool plus account, then your Key Tool Plus/ VVDI2 can use MQB48 function. (But please note key tool plus not shows MQB48 NEC35XX license activated, it can use Multi Prog to read NEC35XX data, KTP load data to add new key, if you want to use key tool plus to read NEC35XX directly, still need to buy NEC35XX license to activate)
• Full replace VVDI Prog Programmer
• Newest Software Version: V1.2.7.0, Firmware V1.2.8
• Newly support ECU TCU Clone
• Adds Vehicle Engine Data Calculation and Processing (MEDC17, EDC17)
• Adds checksum correction function
• Adds data comparison function
• Support to write ISN
• Free Download Xhorse Multi-Prog Software
• Free Download Xhorse Multi-Prog User Manual

GODIAG G-V ECU Cable is used to connect  Xhorse MULTI PROG with GODIAG ECU GPT to read and write data on VAG gearbox ECU and engine ECU, clone ECU.

GODIAG ECU GPT Boot AD programming adapter can help customers read and write ECU data without disassembling the ECU using the OBD2 Bench or GPT Bench method or disassembling the ECU and using the Boot method. This product is equipped with a short-circuit-proof BOOT resistance board connection line to protect the ECU. Customers can use it with J2534 devices and Multi-Prog. Xhorse VVDI Multi-Prog with new function ECU read and write, cloning.

To read ME17.8.8 with Xhorse MULTI PROG & GODIAG ECU GPT Boot AD Programming Adapter & G-V ECU Cable

To read MED17.5 with Xhorse MULTI PROG & GODIAG ECU GPT Boot AD Programming Adapter & G-V ECU Cable

Xhorse VVDI Multi Prog Functions:

1. Read, Write and Clone ECU

• BMW B48/ B58 reading ISN
• BMW MSD80/ 81/ 85/ 87/ MSV90
• Mercedes-Benz SIM271
• BMW MSV80
• VW BOSCH MED17 Series ECUo BMW N13/ N20/ N55/ B38/ TC17X
• Support Marelli.Siemens.Delphi and other ECU manufacturers

2. Read, Write and Clone TCU

• Volkswagen Audi Skoda DQ200, DQ250, VL381 TCU etc.
• Porsche DL501 TCU
• Ford Dodge and other MPS6 series TCU
• BMW DKG, Mercedes-Benz VGS and other models TCU

3. Vehicle Engine Data Calculation and Processing

• MED17/ EDC17 data processing

4. Support Flexible Extension of Third-party Plug-ins

• Support the development of third-party plug-ins and provide data processing and modification services

5. Read Write MCU

• Support reading and writing MCU of various brands including Renesas, Motolora, NXP, Infineon, etc.
• Support certain encrypted chip reading and writing

6. Read Write Vehicle Immo Module

• Support Porsche, LandRover, Mercedes-Benz EZS, VOLVO, VW MQB dashboard, AUDI BCM2,etc.
• Support modules including BMW EWS, CAS1/ CAS2/ CAS3/ CAS4+, FEM BDC.etc.
• Support other common immo modules

Note: Compatible with Xhorse solder-free adapters and cables

7. Read & Write EEPROM

• Support EEPROM and FLASH

8. Read Write Vehicle Dashboard

• Support dashboard of VW, Honda, Hyundai, Kia .etc.

Package List: 1pc x GODIAG G-V ECU Cable
1pc x GODIAG ECU GPT Boot AD Programming Adapter
8pcs x Soft Silicone Wires 
Contact US: