VVDI PROG Programmer Technical Service


Matched product:

V5.3.3 Xhorse VVDI PROG Programmer Multi-Language Read/Write ECU MCU IMMO EEPROM

EU/UK/US Ship V5.3.3 Xhorse VVDI PROG Programmer Multi-Language Read/Write ECU MCU IMMO EEPROM

US$425.00
  • Item No. SK177
  • Free Shipping
VVDI PROG Programmer is with built-in software, frequently update online free, keep updating more types.
Support to read write EEPROM & Flash, ECU, MCU, Dashboard, IMMO, Airbag, remote, and read bosh ecu data.

VVDI Prog User Manual V4.9.9.pdf  (2.5M)

VVDI PROG Programmer FAQs about Error&Solution, Support or not, Procedures
Part 1. VVDI Prog FAQs about Error&Solution:

1.
Q: VVDI Prog read PCF7952,it failed "Chip not connect"?
VVDI PROG connect
A: Please check the connection diagram, and the pins connection.

2.Q: VVDI PROG 95640 read OK but write not (write error on the beginning).

In this case check the eeprom package before any operation, and the operating voltage is clearly marked
You can check here (sorry for the bad picture it was taken by mobile and enlarged)
First row: S64S
The last digit is "S" = 1.8V-3.6V
You have to adjust the vvdi voltage to the correct value (default is 4.5V)

3.VVDI Prog Sprinter W906 EIS reading via new ST questions and answer

Q: VVDI Prog read Sprinter W906 EIS via new ST. Adapter is not working, had to use V1 flash cable to read the eeprom.

A: The connections points on PCB must be cleaned before !!!

Not only take pcb from EIS and quickly put to EZS adapter and await 100% result in 1 seconds like many other users…

Q: Spent an hour moving it slightly, even tried sprinter 2006- from the drop down menu , but with no luck ,V1 flash cable job at the end.

A: Of course work only right choice when use EZS adapter….and dont forget to use external +12V power

Q: Didn’t clean the pcb mate, of course 12v connected, but i looked under the mag. it seemed that the pins are slightly off! oh well the job is finished , i will check the next one , or buy one to check. thanks mate.

A: Every time need to have some donor pcs on stock….not wait until is needed

4.Q: Read Benz EIS OK, but write or verify got error?

A: Please go to setting >>environment, tick off the selection.



5. Q: Read the MC9S12, it got error "chip is crypt, this operation needs to decrypted"?
vvdi prog

A: Please choose secured type in VVDI Prog software to read.

6.Q: VVDI Prog Read LandRover FR "Partition information error, please select the partition size manually" error?
vvdi prog partition
A:
It seems the partition information is lost, it is recommended not to continue reading, as it is easy to lose data.

7.Q: VVDI Prog lock latch cannot lock the EEPROM Adapter?

A: 1. Try other adapters to see if it can lock them.
2. If it still can't stay locked, loosen the screw shown by the arrow

8.Q: Can't Read Fiat 500 airbag module, I conncet all pin like diagrams?


A: Try this option on "Airbag"


9.Q: to do airbag crash data reset and eeprom programmer M35160WT  on bmw cars 2016+, any recommendations?
A: "7-AIRBAG" "BMW" "523-AIRBAG".


 
Part 2. VVDI Prog FAQs about Support or not:

1.Q: BMW ISN function support list?
A: If your BMW car is supported, the ISN will display automatically in the software.

2.Q: VVDI Prog support BMW ISN coding?
A: No, VVDI Prog is used to read chip data, it can read BMW ISN.

3.Q: VVDI Prog can do BMW CAS4 or not?
A: Yes, it can support, you can download the newest VVDI Prog software, and check type in software.

4.Q: Need to read the Airbag units from Renault, VW. The processor in blocks is SPC-560, VVDI Prog support?
A: Yes, it is supported.
vvdi prog

5.Q: VVDI PROG can read FIAT 500 Airbag SPC560P50?

A: If you can't find options on "Airbag", try to read on "MCU".


6.Q: With XDNP30 Bosh ECU Adapters, if thus will read N47 engine ECU?
A: Yes, support.



7.Q: vvdi prog If I can read both the Eeprom and the memory of MCU STM8AF6266TD, which however with the ST LINK instrument is blocked in reading?
A: the chip can't be read if it's encrypted.


8.Q: can vvdi read edc16c39 in bcm module?
A: Not support, no option.

 

Part 3. VVDI Prog FAQs about Procedures:

1.VVDI Prog Read BMW E Class MEVD1724 N20 Engine

1)Start VVDI Prog software,and choose BMW E Class MEVD1724 N20 detailed type.
vvdi prog bmw

2)Click "Connection Diagram".
xhorse vvdi prog

3)Do the soldering according to the wiring diagram.
vvdi prog
vvdi prog diagram

4)Click read on the software menu.After finish reading,please save the data you have read.


2. Possible to use VVDI Prog to renew Opel/Vauxhall keys?
A: Sure, learn it here