Super VAG K+CAN Plus 2.0 Technical Service
- Item No. SV39
- Out Of Stock
1.Super vag k+can plus 2.0 can do odometer correction, read Security Access Code, key programmer, airbag reset tool, TV Activation and diagnostic.
2.Support VW Passat, VW ,VW Bora, VW Polo, VW Golf, Audi A6, Audi A8, Audi A4, Skoda Superb, Skoda Octavia, Skoda Fabia cars.
Super vag k+can is always 2.0 version,not have nay update.Thanks.
Super VAG K+CAN Plus 2.0 FAQ
Notice: Super VAG K+CAN Plus 2.0 support odometer correction for the car models after 2007 year. It cannot work well with Audi A4 and TT.
Q1: What tools can correct odometer for VAG vehicles (VW Audi Seat Skoda) before 2007 year?
A1: Recommend you use SUPER VAG K+CAN 4.8, Digiprog3 or Digimaster3.
Q2: Can Super VAG K +Can Plus 2.0 works with Diesel VAG vehicles (VW Audi Seat Skoda)?
A2: Have a try on the Diesel car models, but it can't work with Diesel trucks.
Q3: Can Super VAG K +Can Plus 2.0 program key for VAG vehicles?
A3: Better to only use Super VAG K +Can Plus 2.0 to correct mileage. To make key for VW Audi, advice you use VVDI.
Q4: When can I use Super VAG K + CAN Plus 2.0 "IMMO Switch" Function?
A4: When the IMMO OFF, you can use "IMMO Switch" Function.
Q5: Super VAG K+CAN plus 2.0 got error message "Host not found" / "Socket error" when update Super VAG K+CAN plus 2.0.
A5: There are two reasons:
1) the factory server is under maintenance, please wait for some time.
2) The network connection is unable to connect to the factory server, how to solve? Try the following three steps:
A). Open command windows ( StartMenu -> Run -> type "cmd" -> OK )
B). Type "ipconfig /flushdns" to flush DNS resolver cache
C). Type "ping xhorse.gicp.net" to check connection to server.
Q6: After use Super VAG 2.0 to complete change mileage, the car can't start.
A6: Please try to the following operation:
1) Please back to the old mileage value with Super VAG 2.0, maybeIt hasn't complete change mileage before you stop it, and then the dashboard freeze and the car can't start.
2) Select the option "Other" in the plus 2.0 menu to reset RB8.
3) Back to the old mileage value with the VAG commander software of VVDI , choose K-LINE dashboard, and set the immobilizer to "6".
Q7: When I use Super VAG K+CAN Plus 2.0 to correct mileage for 2008 VW Touran 1.9 TDI, I got error code (10).
A7: You choose a wrong protocol (as: nec24c32, nec24c64) or your car model is not supported by Super VAG K+CAN Plus 2.0.
Q9: I Super VAG K+CAN plus 2.0 updated 70% / xx% then got "update failed" error
A9: This may:
1. Connection to server temporary interrupted
2. Device does not response
* We are working towards new version to fix these problems.
Comparison about Super VAG K+CAN V4.6 and Super VAG K+CAN Plus 2.0
1.Super VAG K+CAN V4.6 is better for the car that support K-line protocol.
2.Super VAG K+CAN Plus 2.0 is better for the car models that support CAN protocol.
3.Super VAG K+CAN Plus 2.0 support change mileage for the newer car models, while Super VAG K+CAN V4.6 support change mileage for the older car models.
4.Super VAG K+CAN Plus 2.0 supports reading more car's pin code.
VAG K+CAN V4.6 can not update to V4.8 version,or it will be blue screen.But Super VAG K+CAN Plus no need to worry update.
Be sure to disable/uninstall anti-virus software before download
Please note,anti-virus software can flag up this product software as having a virus. This is a false positive and is due to the software containing the application file like .exe. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable virus scanner! Our product software is completely safe and virus free and all other virus scanners confirm this.
If the software data is destroyed or lost because you forget to disable/uninstall anti-virus software, please contact our customer service firstname.lastname@example.org
, we arrange to resend you CD or send you the software via internet.