Solved! Condor MINI Plus II Fail to Decode HU83 HU92R


Question:
For the blade SIP22 (fiat ducato) Condor MINI PLUS II is not decoding correctly. What I should do?
wrong decoding
hu92r
condor ii
sip22
For HU83, the decoding is different than the key.
hu83
hu162t
Here is the Solution:
1)Perform cutting calibration again
2)Check if shoulder align is correct
3)Make sure used cutter is the same as that in settings
In this case, the problem is the used HON66 in cutting calibration.
hon66 for calibration
Use a new HON66 blade in cutting calibration as required, and Condor II Machine should decode well.

Done!