How VVDI PROG+VVDI2 Read MQB48 IMMO Data?

---

Matched product:

1.VVDI PROG+VVDI2
2.VVDI Key Tool Plus

1.VVDI PROG+VVDI2

Step 1.Read Dashboard
There are 2 ways of connection,
Method 1 (Lift Pin):



Method 2 (Cut Pin):



Run VVDI PROG software.
Select
5-DASHBOARD>>VW>>MQB-LOCK(D70F35XX)
Read Data.

Step 2.Encypt Immo Data
Run VVDI2 software.
Select
Key Learn>>MQB platform instrument immobilizer>>Instrument with MQB48(VDO/JCI-NEC35XXOCK)
Load dash chip data.

Save immo data.


2.VVDI Key Tool Plus

Path:
Immo programming>>VW>>Select by Type>>MQB instrument immo system>>Instrument-MQB48(VDO/JCI-NEC35xx lock)


Step 1.Read Dashboard
*Network connection is required
Go to
Programmer reads file>>Read NEC35xx chip
Check diagrams on the left.

Here we read it by lifting pin.
Daub scaling powder on the pin to be lifted.

Slightly lift up pin using hot-air gun and knife.


Solder a wire to chip so it could communicate with tool.

Solder rest wires to chip by diagrams.

Connect PCB to Key Tool Plus by a DB15 cable.

Read data.


Step 2.Add Key
Go to "Generate dealer key-Load immo data".
Load chip data.
Select
VW>>Prepare normal dealer key>>Add key - You should have a working key
Insert new key into coil.