How to use Xhorse VVDI Key Tool Plus with XDNP45 Adapter Read Audi J518

---

Matched product:

XDNP45 Solder-Free Adapter is used to connect key tool plus or mini prog to read/ write Audi J518 data, like Audi A6L Q7 .etc OEM 8E add spare key or AKL.

And we also have ELV Emulator for Audi C6 Q7 A6 Steer Column Module J518.

Here is the guide about how to use Xhorse VVDI Key Tool Plus with XDNP45 Adapter Read Audi J518 eeprom dump data.

And here is the XDNP45 Audi A6Q7 J518 Adapter


1. Fix the holes on the module with nylon screws

Install the XDNP45 adapter, please note keep the pin is pressed on the solder joint.

2. Tighten the nylon nut

Check whether the pin is pressed on the solder joint, if it is not in one position, it will fail to read

3. Tighten the adapter and connect the J518 adapter.

Enter VVDI Key Tool Plus>>IMMO>>Audi>>Audi>>J518, choose the corresponding model, and start reading


J518(2010–)(0L01Y)(Adapter)


Read eeprom dump file


Reading process.


Read successfully. Finish.