How to use VVDI PROG to Read Harley Davidson Motorcycle PIN Code for All Keys Lost


Matched product:

Xhorse VVDI Prog Programmer and 35160DW Chip

EU Ship No Tax Xhorse VVDI Prog Programmer and 35160DW Chip

US$450.00
  • Item No. SK177-SA1864
  • Free Shipping
Xhorse VVDI Prog Programmer and 35160DW Chip bundle package
35160DW Chip Support M35080, M35080-3, M35080-6, M35080V6, M35080VP, D80D0WQ,160D0WQ, 35160WT

Extract pin code from BCM file

Reading eeprom 25L160 allows reading pin needed to start engine without special diag equipment.

You have to remove and disassemble BCM module from Harley motor.

This module is also difficult to open because the very thin plastic and silicone hold it tightly.

It is a control module out of a Harley-Davidson motorcycle. We will try to read it on the table. Here is the main processor.

This is the eeprom chip.



We will try to read the chip data using xhorse vvdi prog.
Firstly try the eeprom andn clip adapter but it failed to read under 25LC160B (CLIP) option.


Then we desolder and solder the eeprom chip to the eeprom socket.

Choose EEPROM/FLASH-Microchip- 25LC160A

VVDI Prog reads eeprom successfully this time.

Please read it again and read it a few times and verify because it is important to check if each reading is not different.

Then post dump to MH or DK or somewhere else to have someone to extract the pin code from the BCM dump file 25L160.

Then you can program key with the pin code.