How to Solve BMW OBD Programming Issues using VVDI BIM Tool?
Did you have these problems below after BMW OBD Programming using
Key Tool Plus/
VVDI2/
BIM Tool or other tools?
>Prompts
unsupported versions and requires upgrades
>Preprocessing ok but
coding loss and can't recover it
>Preprocessing is unexpectedly
interrupted due to missing SWFL version
>SWFL or coding version
mismatch
Here we will show you how to fix these issues using VVDI BIM Tool.
Take FEM.
BIM Tool showed SWFL Lost.

Then we will fix it using BIM Tool.

Select "Fxx/Gxx Program/ Code" and "Connect Car".

Select
Vehicle programming>>40-FEM(FEM_BODY)>>Calculate programming file

"Target istufen lev" should be the same as "Shipment".

The part in grey indicates FEM's version, and the part in orange FEM version to be programmed.

Select "Programming".

Read and clear DTCs.

Select
FEM/BDC Key Learn>>Get Key Info
Coding recovered.

Done!