How to Change Xhorse VVDI BE Key Pro Benz PCB Frequency?

---

Matched product:

XHORSE VVDI BE Key Pro For Benz XNBZ01CH Remote Key Chip Improved Version default frequency is 315MHZ,it supported to change frequency to 433mhz. Here we will introduce two ways to change Xhorse Benz Key PCB frequency.


1.Remove PCB FRE resistor change to 433MHZ.


2.Change Via VVDI MB Tool Software.
You can use VVDI MB software check key frequency firstly in EIS Software,other function set frequency.

Then it shows 315mhz when you read frequency.
3.Choose 433mhz to set,and check frequency again.

---

Xhorse VVDI BE Key Pro Benz Key Pcb Exchange Token Error

 

Solution:

Please contact the seller you bought VVDI MB Tool,and contact them to set the type for you. Bind with condor one or not,then process the exchanging.
 

---

How to exchange VVDI MB Tool Bonus Points to BGA Token?

1.Collect bonus points from VVDI BE Benz key.

Each Xhorse VVDI Benz key is with 200 points,can exchange 1 BGA Token.

2.Query the points,then click Upload the points.



3.After upload successfully.Go to new Xhorse app on your phone.Register and log in.And no worry that without Key Tool ,with key tool both can use Key Tool app to exchange BGA token.

4. Run the APP and scan the QR code for link it.


After log in the account , your device is link on your account ,you can check it with app.
5.Click Shop,then Token in xhorse app. Exchange.