Product Description
IKEYCUTTER CONDOR XC-007 Master Series Key Cutting Machine is a very powerful machine, easy to use ,equipped with most advanced software and precised mechanism.
IKEYCUTTER CONDOR XC-007 Master Series Key Cutting Machine
Now,Condor XC-007 stops producing,check Condor XC-MINI Plus Or Condor Dolphin XP-005 Key Cutting Machine
And Condor XC-007 still keeps updating in xhorse update kit software.
Top 8 Reasons To Get CONDOR XC 007 Key Cutting Machine:
1. Internal Software
Internal software is based on well know and respected instacode software. Software shows key cuts on the touch-up LCD screen, allows to calculate cuts when we need it(in case of broken keys,etc.) Software is fully upgradable through pc of internet.
Now software version is update to V2.2.9,during the update pls can't disconnect the power ,if update failure ,can retry
2.Touch-Up Screen
All features of the XC-007 are covered with the use of touch-up screen or keys that are situated convenienty on the side of the screen(you can use them during some heavy works, if you do not want to scratch or smudge screen)
3.Change Cutter Easily
When you need new cutter, simply press, wait for a click, turn knob and then you can take out an old cutter and put a new one into the machine and keep working. No need any special tools and a long break in your working time.
4. Simple to Use
Universal clamp allows you to mount keys in easy and certain way, so your work can be done in a way you want.
5. High Accurancy
Tracer and cutter are mounted on the same tower to increasing the machine accurancy and lower the possiblity of any malfunction during process of reading or cutting. Calibration of cutter and tracer is very easy and takes just a few moments.
6.LED Illumination
Dring process or designing and producing, our main focus was lower power requirement and low weight of the machine. So we used an LED illumination to achieve our goals.
7.Specially Designed Tray
Located on the side of the machine, the specially designed tray allows you to keep your cutters and tracers in one place and just in your reach. So you can pick they up easily.
8. All connectors that are used by CONDOR XC-007 are conveniently located on the back of the machine, so they are protected during use.
CONDOR XC-007 Supported Vehicle List:
Acura, AlfaRomeo, Audi, BMW, Buick, Cadillac, Chevrolet, Chrysler, Citroen, Daihatsu, Dodge, Ducati, Ferrari, Fiat, Ford, GCC, GMC, GreatWall, Holden, Honda, Hummer, Hyundai, Infiniti, Iveco, Jaguar, Jeep, Kia, Lancia, LandRover, LDV, Lexus, Lincoln, MAN, Mazda, Mercedes, Mercury, Mini, Mitsubishi, Nissan, Opel, Peugeot, Piaggio, Porsche, Proton, Renault, Rover, Saab, Scania, Seat, Skoda, Ssangyong, Subaru, Suzuki, Toyota, Vauxhall, Volkswagen, Volvo
Package List:
1pc x XC-007 Main unit
1pc x Protective cover
4pcs x Ottomans
1pc x X1 Outside milling fixture
1pc x X2 Inside milling fixture
2pcs x Tracer
1pc x 2.5mm milling cutter
1pc x 1.5mm milling cutter
1pc x Power cable
1pc x USB Cable
1pc x User's Manual
1pc x Brush
1pc x 2mm Allen wrench
1pc x 4mm Allen wrench
1pc x Product inspection certificate
1pc x Package List
IKEYCUTTER CONDOR XC-007 Key Cutting Machine Related Pictures:
Contact US:Email:
sales@xhorsevvdi.comIf you have any questions, please do not hesitate to contact us.
Shipping Method and Delivery Time:EU, US, UK ,RU Warehouse: 3-7 working days. We have stocked up hot sale items in US, UK ,RU, EU Warehouse, Fast Delivery No Tax. But if overseas warehouse is sold out, we will send from Hongkong by DHL.
EU warehouse only for EU customers. UK warehouse for UK address only! US the same, and not includes overseas territories. No customs tax.
DHL: 3-7 working days. And EU address by DHL invoice value can't be less than 150USD. If your address is remote area for DHL, need to pay remote cost about 35USD or no extra fee ship by YANWEN.
Yanwen Express: 5-17 working days. No customs Tax or remote cost for EU Countries.
About VAT, if company buyer needs the VAT invoice, please pay the VAT, then we provide VAT invoic for you to do tax refund.
Tech Support
IKEYCUTTER Condor XC-007 Key Cutting Machine Update Info:
v2.3.2 Beta (2015-09-09)
* Add new Colora2
--------------------------------------------
v2.3.1 Beta 3 (2015-08-11)
* Add support for using X3
clamp with 1.5mm cutter
(flat 2.4mm)
--------------------------------------------
v2.3.1 Beta 2 (2015-07-06)
* Fix HY18R
* Fix ZD30
--------------------------------------------
v2.3.1 Beta 1 (2015-06-26)
* Fix TOY40(4-4)
* Fix DAT17
* Fix HU64
* Fix HU83-EXT
* Fix GM37
* Fix HYN11
* Fix VA2EH2
* Add HY18R,HU41,ZD30
* Add X3 clamp cutting depth
setting
* Add some key code images
* Increase movement speed
--------------------------------------------
v2.3.0 Beta 7 (2014-11-12)
* Fix bug of key learn
--------------------------------------------
v2.3.0 Beta 6 (2014-11-11)
* Modify HU56 shoulder
* Fix HU64,HU101 shoulder
error
--------------------------------------------
v2.3.0 Beta 5 (2014-11-10)
* Modify HU71 tip
* Modify TOY43 bit flat to 80
(down from 100)
* Modify TOY43 tip
* Modify HU101 shoulder
* Modify HU64 shoulder
* Modify HU100 slot width to
280(up from 250)
* Modify TOY40 tip
* Modify TOY48 tip
* Add comment for HU49 246/
256
* Z-axis cutting times adjust is
back
* Increase history record counts
* Laser keys shoulder are more
rounded
* Fix a bug of params or picture
may be lost when turn on the
machine
* You can choose which version
to update with new update
tool(v1.4.3)
--------------------------------------------
v2.2.9 (2014-07-18)
+ Add select keys by car model
+ Add key abrasion correct in
key learn
* Increase history records
length and total count
* Modify HU66 tip and shoulder
* Height detect is now
using cutter
* Modify HON66 tip
* Modify HU83 EXT shoulder
* Modify TOY43
* Modify X3 FO21
+ Add RENAULT key
+ Add GREAT WALL key
* Update speed increase
--------------------------------------------
v2.2.8 (2014-03-11)
+ Add HU71P
+ Add HON70
+ Add PG33(VA2EH2)
+ Add VAC102
+ Add YH35R
+ Add HU64-2 HU64-3
* Modify HU64,HU83,NE66,
WT47,SIP22
* Fix a problem of touchscreen
--------------------------------------------
v2.2.7 (2013-12-13)
+ Add password protect for
history data
--------------------------------------------
v2.2.5 (2013-10-24)
* HU100 move to X2-B
* HU100R move to X2-C
+ Add MAZ24RTW
+ Add ICF03
* Fix some tip error
--------------------------------------------
v2.2.4 (2013-10-22)
* Change X2 fixture init
--------------------------------------------
v2.2.0 (2013-09-27)
+ Add search function in history
* Fix HON66 header
* Fix a problem when cutting
HON66
--------------------------------------------
v2.1.9 (2013-09-24)
* Fix some tip error
--------------------------------------------
v2.1.8 (2013-09-22)
* Fix a problem in cutting twice
--------------------------------------------
v2.1.7 (2013-09-16)
* Fix HU83 EXT shoulder
* Fix HU101 shoulder