Benz ECU Test Adaptor Used to brush ECU,can work with Xhorse VVDI2,VVDI.
Benz ECU Test Adaptor
Benz ECU Test Adapter can work with the following device
: Xhorse VVDI2, VVDI Tool (SV30), NEC57. As long as the ECU flashing tool supports CAN protocol and meanwhile supports these ECU types.
Newly add sim4le sim4se cable Nov 24th:
Support ECU Model :
VVDI2, VVDI and Benz ECU Tester Adpater Connection:
2pc x Benz ECU cable
1pc x CR3.XX Adaptor
1pc x CR4.XX Adaptor
1pc x CR5 Adaptor
1pc x SIM271DE2.0/CR6/CR60.XX Adaptor
1pc x SIM4LKE Adaptor
1pc x SIM271KE2.0 Adaptor
1pc x CRD.11 Adaptor
1pc x CRD2.XX Adaptor
1pc x ME9.7 Adaptor
1pc x MED17.7.X Adaptor
1pc x SIM266 Adaptor
1pc x sim4le sim4se
Email: firstname.lastname@example.orgIf you have any questions, please do not hesitate to contact us.
Shipping Method and Delivery Time:
EU, US, UK ,RU Warehouse: 3-7 working days. We have stocked up hot sale items in US, UK ,RU, EU Warehouse, Fast Delivery No Tax. But if overseas warehouse is sold out, we will send from Hongkong by DHL.
EU warehouse only for EU customers. UK warehouse for UK address only!
DHL: 3-7 working days. And EU address by DHL invoice value can't be less than 150USD. If your address is remote area for DHL, need to pay remote cost about 35USD or no extra fee ship by YANWEN.
Yanwen Express: 5-17 working days. No customs Tax or remote cost for EU Countries.
How to use Benz ECU Test Adaptor with VVDI MB Tool?
VVDI MB Tool
with Benz Ecu Test Cables is OK to renew ME9.7 MB, ISM in w164 and w221 and used 722.9 ETC board (7-gearbox module) version VGS_73 or like as 3.
ME9.7 ECU Renew Steps
VVDI MB connection.
Get erase pass
Renew – success
Now you can initial startup in DAS/Xentry, have there 2 possibility…with data from old ECU or without… then online
FOR get erase pass ONLINE WITH DEVICE VVDI MB , After reading data ECU (with vvdi mb)
pin connection for ME9.7 MB
Finally, ECU renewed, and put into car made adaptation works good. Car starts.
Benz ECU renew cable can renew (used) ISM in w164 and w221, when is the ISM unit in 100% condition and not broken.
Successfully renewed used 722.9 ETC board (7-gearbox module) version VGS_73 or like as 3 with VVDI MB tool and today assigned to the car using MB-SCN online access.