How to use XDNPP1 Solder-free Adapters With Xhorse device to add key?
Matched product:
Xhorse XDNPP1 Solder-free Adapters for BMW 5Pcs Set work with MINI PROG and KEY TOOL PLUS
Latest price:US$170.00US$149.0012% off
- Item No. HKSK358-1
- Free Shipping
Xhorse XDNPP1 Solder-free adapter for programming no need soldering for BMW, work with Xhorse MINI PROG and KEY TOOL PLUS
Here we’re going to share with you how to use Xhorse Key Tool Max and VVDI Mini Prog & BMW CAS3+ adapter to add a new key for BMW M3 2011 with a CAS3+ module.
Step 1
First remove the CAS3+ module.
Now on bench, clean points on the module.
Remove MINI Prog head.
Then Use XDNP11 BMW CAS3+ adapter to connect VVDI Mini Prog and the circuit board.
Step 2
Turn on MINI Prog.
Open up Xhorse app on your phone.
Switch to the MINI Prog page.
Click on “Select” to connect your phone to mini prog.
Step 3
Select
- Immo>>BMW>>BMW>>CAS3+(0L15Y)(ADAPTER)
Check if it’s connected well by diagrams.
Then select
Then select
- Read>>EEPROM>>Start operation
Data reading success and save the file.
Step 4
Now back to Key Tool Max page.
Select
Step 4
Now back to Key Tool Max page.
Select
- Special Function(Network connection needed)>>Immo Data Tool>>Europe>>BMW>>CAS3+ (0L15Y, 0M23S)>>CAS3+
Load the file we just saved.
Follow the prompt to add a new key.
Done!
That’s the procedure of BMW CAS3+ key programming using VVDI Key Tool Max and Mini Prog with Xhorse BMW solder-free adapter.
Follow the prompt to add a new key.
Done!
That’s the procedure of BMW CAS3+ key programming using VVDI Key Tool Max and Mini Prog with Xhorse BMW solder-free adapter.