How to Read Fiat PIN Code by VVDI Key Tool Plus?

where is the option of reading Fiat PIN code on VVDI Key Tool Plus?
Q: How to read the Fiat Scudo 2008 (Peugeot, Citroen) PIN with VVDI Key Tool Plus? I tried all sorts of options, but failed! I need to make a key CE0536.
Transponder Clone
Key image1
Key Image2
Read PIN code via the Peugeot/Citroen option - Type 3 CAN (adding).
Get the password

Path: Immo Programming>>Peugeot>>Password reading>>Type 3 CAN (adding)
Type 3 CAN (adding)
Start programming
Then follow the instructions like ignition on/off for several times.
Read password
Switch off the ignition
Switch off/on the ignition as required
Calculated the password

Good to know:
  • Fiat system is based on Peugeot/Citroen
  • Related vehicle options may be a way out
Type 1 CAN
Type 2 VAN

Customer Feedback:
I was able to read the pin code, like Peugeot or Citroen, the "Type 3 CAN (adding)" option. I followed the instructions on the VVDI key tool plus screen: "ignition off" for 5 seconds, then "ignition on", and so on until I read the pin code. I had to repeat about 50-60 times - ignition off - ignition on (while reading the pin code - you have to be patient.