How to Add Spare Key for 2018 MINI R55 BDC by VVDI Prog + VVDI2?
VVDI Prog+VVDI2 or Key Tool Plus Tablet is a great tool for FEM BDC programming. Here we are going to show you how to add a key for 2018 MINI R55 with BDC module.
Tools:
VVDI PROG
VVDI2
FEM/BDC Test Platform
Procedures:
Step 1.
Remove BDC module.
![remove bdc](/upload/service/23022416772341575896.jpg)
Connect BDC module, test platform and VVDI2.
On VVDI2 software,
Go to Key Learn>>FEM/BDC Key Learn
Key info.
![key info](/upload/service/23022416772341617173.jpg)
Click "Programming FEM/BDC system" to start.
Step 2.
Back up coding file.
![back up coding](/upload/service/23022416772341662511.jpg)
Open BDC, connect eeprom chip to clip adapter.
![connect eeprom](/upload/service/23022416772341719799.jpg)
On VVDI PROG software
Select 1-EEPROM&FLASH>>ST(CLIP)>>M95256(CLIP)
Read eeprom.
![eeprom](/upload/service/23022416772341753123.jpg)
Load eeprom dump file to create service dump by VVDI2.
![load eeprom](/upload/service/23022416772341796272.jpg)
Write new dump to chip by VVDI PROG.
![write new dump](/upload/service/23022416772341833077.jpg)
Write original dump to chip by VVDI PROG.
![write ori dump](/upload/service/23022416772341883472.jpg)
Restore BDC module, connect it to VVDI2 and test platform.
Now we can add key.
Step 3.
Select
Prepare dealer key with ignition switch>>Have a working day
Put working key into key coil of test platform.
![isn](/upload/service/23022416772342027688.jpg)
Insert new key.
![add new key](/upload/service/23022416772342083042.jpg)
All done!