VVDI Prog renew BMW PCF79XX Remote Steps
BMW E SERIES
ORIGINAL 315 Need PCF79XX adapter
ORIGINAL 868 Need PCF79XX adapter
THIRD PARTY Need PCF79XX adapter
BMW F SERIES
315 REMOTE Need PCF79XX adapter
433 REMOTE Need PCF79XX adapter
868 REMOTE Need PCF79XX adapter
VVDI Prog Renew BMW remote chip with PCF79XX adapter Connection Diagram:
BMW E Series
ORIGINAL 315M Chip/ORIGINAL 868M Chip/THIRD-PARTY
ORIGINAL 315M Chip in circle /ORIGINAL 868M Chip in circle /THIRD-PARTY in circle
How to renew BMW remotes with VVDI Prog:
This is a BMW remote review from a customer who has good success.
I did renew 2 keys! Renew BMW series E 868 key – 100% OK using vvdi prog v4.6.0. Both worked and now are programmed to cars!
Only thing you need to disconnect from PCB is battery while writing the renew file.
I think that is only for those who have older version of that adapter. Older version came with 33 ohm resistor and later they decided that it is not needed and newer adapters like mine came with 0 ohm resistor that is just connecting both sides together without resistance.
If you have that 33 ohm resistor then remove it and short-connect it.
If you have 0 ohm resistor, then don’t mind that first box in connection diagram. It’s not for you.
I did it in circuit.
VVDI Prog Programmer Unlock BMW E90 PCF7945 Remote Key Steps
1.Use tool to read BMW E90 Key transponder information,it shows "Locked"
2.Start VVDI Prog software,choose the detailed type,then click connection diagram.
5.After the previous steps,check the BMW E90 key again.It shows "Unlock".