Download & Technical Support

VVDI2 Commander

Key Cutting Tool

Automobile Key Programmer

VVDI Prog Programmer

Xhorse License & Token

Original Xhorse Keys

OBD2 Cable & Software

Key Blade

Xhorse VVDI2 VAG Commander Technical Service

Matched product:

VVDI2 VAG Full with 4th 5th IMMO ID48 96bit ID48 OBDII and Free Porsche Function

VVDI2 VAG Full with 4th 5th IMMO ID48 96bit ID48 OBDII and Free Porsche Function

34 Reviews
US$1,499.00
  • Item No. SV86-C-SV86-F7
  • Free Shipping
VVDI 2 includes all the VVDI functions, the function of Tango, remote control generation and chip identification is improved, and also the coil’s stability has been enhanced.
This version contains Basic Module, VW module and 5th immo authorization and Porsche Function
VVDI2 VAG FAQS,
VVDI2 add Audi A6L / Q7/ EZS-Kessy (JB18) Spare Key General Steps
VVDI2 MQB Function:
vvdi2 vw mqb

VVDI2 VAG FAQs:

1.Q:VVDI2 doesn’t work with EDC 16U1… Tried on Seat Toledo MY05 using VW Touran ECU. Finally I disabled immo but I want to adapt it to car
A:I am sorry that not work because is tool old … working after 2007 (u34).You can adapt that type of ECU via SCK.
Use any u34 ECu from 2007 up and you will see.
vvdi2 vag


2.Q:s it possible to swap with Xhorse VVDI2 VAG if I know CS, PIN and IMMO I try now on Skoda to change vin with success.
A:I am sorry that it is not supported at present.Thanks.
vvdi2 vag
vvdi2 vag

3.Q:VVDI2 VAG software change langauge,but it got failed,error like following,how can i solve?
vvdi2 vag language
A:Please right click and select "Run this program as an administrator",then change langauge English.Because Polish language is not completed yet,it get the error like pic shows.VVDI2 VAG Polish language will be added fully soon.Thanks.

4.How to change Xhorse VVDI2 Screen Menu Language?
Please press T button,and it will have option to switch language.


VVDI2 add Audi A6L / Q7/ EZS-Kessy (JB18) Spare Key General Steps

 
VVDI 2 -> Key Learn -> 4th Immobiliser System Audi -> A6L / Q7/ EZS-Kessy (JB18)
 
Read note: Most cars before 2009 use 9S12DT128 chip and cars after 2009 use 9S12DT(G)256
 
Choose appropriate chip above -> Read J518 EEPROM with Working Key -> Write down CS and Pin on a piece of paper -> Save EEPROM
 
Type CS and Pin into VVDI 2 -> Type “2” for Number of keys to learn -> Insert 8E chip into VVDI 2 ->Select Make Dealer Key -> Select Key Learning
 
Insert dealer key into car and switch on for 2 seconds. Then put second key into ignition within 5 seconds. Then press okay after keys are learned.

vvdi2 audi
 
VVDI2 VAG newly add the function of copy 48,but require VAG 4th immo authorization.

1.Run VVDI2 Quick Start icon,and click VW car brand.Or run directly the VVDI2 Vag software icon.

2.Click Key learn>>4th immobilizer system – copy 48 transponder
vvdi2 copy id48

3.Copy 48 procedure require PIN and component security bytes from cars.

4.Select Get component security from engine control unit via obdii.

5.Connect the emulator to VVDI2 commander and switch ON ignition with the emulator, switch OFF/ON for 3 times

(attention: it requires OBD when lost all key).

6.Decode the collected data via internet, and save the calculate 48 data. You can copy/prepare key with calculate 48 data(attention: every success calculation will cost 100 remote points).
vvdi2 copy id48

7.Learn the new key with calculate 48 data. If the key was made by copy, it can start engine without learn.

vvdi2 id48
 

Back to top