How to Operate iKeycutter Condor XC-Mini
For more detailed pics,you cna check our guide:http://www.xhorsevvdi.com/upload/pro/new-condor-xc-mini-user-manual.pdf
How to use “Key Database”
User need to supply the key code, then can cutting the key.
1）Enter the Main interface, Click on Key Database
2）Choose the Car Brand, Click on Confirm
3）Enter the key code.Click on Confirm
4）Enter the key serial code Click on Confirm
5) The Bitting Code will be found in the database, and it will be shown on the screen,Click on Cut to start.
How to use “Key Duplication”
User need to supply the Car type and Year of the production
1） Enter the Main interface, Click on Key Duplication
2） Choose the Car Maker .Click on Confirm
3）Choose Car Type, Click on Confirm
4）Choose the Car type and Year of the production, Click on Confirm.
5）Put the original Key in the properly position of the clamp display on the screen, then Click on Decode Key.
6）Verify bit code and modify bit code if needed, Click on Cut to start
How to use “Cut by Bitting”
There are 2 methods to get the key using Cut by Bitting
Method 1:without the origin key using Cut by Bitting
1） Enter the Main interface, Click on Cut by Bitting
2） Choose the Blank Key, Click on Confirm
3） ①Select Key Type ②Click on Confirm
4） ①Put the Blank Key in the properly position of the clamp display on the screen
②Enter bitting and verify, then click on Cut to start
Method 2:existing the origin key using Cut by Bitting
1）Choose the Blank Key, Click on Confirm
2）Select Key Type, Click on Confirm
3）Click on Decode Key, the found bitting will display on the screen
4）Verify bitting and modify bitting if needed, Click on Cut to start。
How to use “Find Bitting”
Parts of the car are missing bitting on door lock/trunk lock/ignition lock, enter unknown bitting as "?"
1）Enter the Main interface, Click on Find Bitting
2）①Select Car Maker ②Click on Confirm
3）①Select the Blank Key ②Click on Confirm
4) ①Select Key Type ②Click on Confirm
5）①Enter known bitting
②Enter unknown bitting as "?"
③Click on Find Bitting Code
6）Possible key bitting will be listed. Note that system has sorted the codes by the most economical way in order to save blank keys. For example, the bitting under " First key" only needs three blank keys, the bitting under "Second Key" need another three blank keys, then the "third Key".
How to Update Condor XC-MINI Key Cutting Machine?
1.Connect MINI CONDOR with your computer by USB cable.
2.Turn on key cutting machine.
3.Run Update Tool software,you can download from this link:http://www.xhorsevvdi.com/upload/pro/condor-xc-mini-update.zip
4.Click update online button to start update.
5.Wait for the process.Finish.
VVDI Benz BGA tool Feedback:
1. i test password from 212 new model super good tool need pay 2 tokens need 10 min all ok
2. Do you have see video of this tool?They say can do all key lost on w212.No tool can do it even Mehaco or nec pro51.
w212 eis on video, sure it can.. mehaco/mercedesinstrument can do all keys lost on w212.. the option is availible a few months.
I try to collect list of OK and K.O. experiences with IR pass reading with VVDI BGA TOOL
W210: EIS/EZS A208.545.01.08 - MCU ??? -read PSW IR - not successful
W210: EIS/EZS A210.545.02.08 - MCU 1D69J - read PSW IR - not successful
W210: EIS/EZS A210.545.03.08 - MCU 1D69J - read PSW IR - not successful
W210: EIS/EZS A210.545.00.08 - MCU 0D69J - read PSW IR - not successful
W215: EIS/EZS A215.545.00.08 - MCU 0D69J - read PSW IR - not successful
W215: EIS/EZS A215.545.08.08 - MCU 1L85D - read PSW IR - not successful
W203: EIS/EZS A203.545.05.08 - MCU ??? - read PSW IR - OK
W203: EIS/EZS A203.545.05.08 - MCU 1J35D - read PSW - OK
W203: EIS/EZS A209.545.09.08 - MCU 1L85D - read PSW IR - not successful
W220: EIS/EZS A215.545.02.08 - MCU ??? - read PSW IR - OK
W220:EIS/EZS A215.545.00.08 - MCU 1D69J read PSW IR - not successfulW639: EIS/EZS A639.545.05.08 - MCU 2x 1L02Y - read PSW IR - not successful
W639: EIS/EZS A639.545.09.08 - MCU 0L01Y - read PSW IR/OBD - not successful
I Can guarantee it will not read ANY WITH HC05
1D69J/0D69J cannot be read by IR alone - A calculation with kline is possible.
read a w203 A203.545.05.08 with mask 1J35d password ok
W203 IES 203 545 05 08 read PSW IR OK
W 220 IES 215 545 02 08 read PSW IR – OK
Only support parts of HC05, HC08 motorola eis(K line),if cannot support will show error, need to remove eis get eeprom.
We have tested W215 ok, but not means all W215 can support.in fact only support parts of this type.